Frequently asked questions

Using Morse Scout

Do I need a computer or internet connection to practise?

No. All training activities work offline. Wi-Fi is only used to set the clock. A computer is needed only for firmware updates.

What keys can I use?

Straight keys, paddles (single or dual lever) and bugs with a stereo (TRS) plug. You can connect up to three at once. See Connect a key or paddle.

Can I practise receiving without a key?

Yes. The Receive activities need no key.

How fast can it go?

From 3 to 50 WPM, with optional Farnsworth spacing. See Speed and timing.

Can Morse Scout decode signals from my radio?

No. Morse Scout decodes what you send with a key connected to it. It does not listen to a radio or microphone.

Can I use Morse Scout to key my transmitter?

No. Morse Scout has no protected keying output for a radio. The tip and ring contacts of its three TRS key-input jacks connect directly to ESP32-P4 GPIOs; there are no protection devices in those paths. Do not connect a radio’s PTT or keying input directly to these jacks. External voltage or static discharge could damage Morse Scout. Protection devices are planned for a future version of the I/O board.

Can I use headphones?

Yes. Headphones have been tested and confirmed to work, but compatibility varies. The current I/O board provides a mono BTL speaker output rather than a standard stereo headphone output. Some headphones and other audio devices may need an adapter cable that remaps one audio contact to the headphones’ common contact. Do not connect either audio conductor to electrical ground.

What language does the voice speak?

English.

Can I add my own practice words and books?

Yes, on a microSD card. See Word and phrase lists and Books.

Which microSD card formats are supported?

Morse Scout supports FAT12, FAT16, FAT32 and exFAT, so factory-formatted SDHC and SDXC cards can be used without converting large cards to FAT32. SDXC cards through 2 TB are within the design scope, but only capacities listed in a release’s test notes have been physically verified. SDUC cards over 2 TB and individual files over 4 GB are not currently supported claims.

Morse Scout never formats a card after a mount failure. If a card needs to be reformatted, back it up and use the official SD Memory Card Formatter on Windows or macOS. A card that still does not mount may have a damaged or unsupported filesystem.

Updates and settings

Will I lose my settings when I update?

No, as long as you leave Erase device unchecked. See Update firmware.

Can Morse Scout update itself over Wi-Fi?

No. Updates are installed from a computer with Chrome or Edge.

How do I reset everything to the defaults?

There is currently no reset option on the device. See Display and system.

Building and the project

Can I buy a Morse Scout?

No. Morse Scout is a non-commercial, open project and is not sold. You build your own from the published designs. See Build Your Own.

Can I build one now?

No. Morse Scout is not sold; you build one from the published designs. The tested custom I/O PCB v1.2 fabrication package is available in the hardware repository. See Project status.

Is it suitable as a club project?

Yes. It is designed for individual builders and for club group builds. See Build Your Own.

What skills do I need to build one?

Basic soldering, a multimeter and access to a 3D printer. See Skills and tools.

Is Morse Scout the same as Morse Tutor?

No. Morse Scout is an independent design, inspired by the original Morse Tutor by Bruce E. Hall, W8BH. See Credits.

Is exFAT patent-licensed for commercial redistribution?

This free, open-source hobby project enables the exFAT implementation included with FatFs. exFAT was developed by Microsoft and may be subject to patent or licensing requirements in some jurisdictions or commercial uses. Project contributors provide no patent license. Commercial distributors must evaluate their own requirements.