1. Current status
| Part | Status |
|---|---|
| Display board (Elecrow CrowPanel Advanced 7-inch ESP32-P4, PCB V1.1) | Supported off-the-shelf ESP32-P4 development board. |
| Custom I/O board | PCB v1.2 is current and tested. A board made from the v1.2 Gerbers passed bring-up and functional tests and is used in the current Morse Scout. |
| v1.2 fabrication package | Published on GitHub. Download the tested package from the Morse Scout hardware repository. |
| Enclosure | Current design fits the v1.2 I/O board. Public files are available in the Morse Scout enclosure repository. |
| Parts lists | Current website and detailed BOMs are available in the project. |
| Firmware | Working on the current Elecrow V1.1 and custom-PCB v1.2 hardware. See Update firmware for the latest release. |
| Assembly instructions | Complete for the current tested build, including illustrated PCB assembly, final assembly and bring-up procedures. |
The current custom board is the DS3231/single-speaker-pass-through design.
2. Safety notice
- Use the latest revision of the PCB (revision v1.2). The revision is printed on the back of the board.
- The speaker connection uses two signal-carrying wires; neither wire is ground. It works directly with most headphones. Some speakers may need an adapter cable that moves one plug conductor to the speaker’s ground contact.
3. Validation completed
- Native KiCad schematic ERC: 0 errors and 0 warnings.
- PCB routing: complete, with 0 unrouted nets.
- PCB DRC: 20 accepted warnings and 0 unconnected pads. All 20 warnings result from the four jacks deliberately overhanging the board edge.
- A fabricated v1.2 board passed key, encoder, volume, sleep/wake, RTC, and speaker tests.
4. Publication work remaining
The current hardware and build documentation are published in draft form for review. Check the linked repositories and pages for future revisions.
5. Required parts and tools
See Parts list and Skills and tools.