1. Prototype or validation status
The 3D-print files are available in the Morse Scout enclosure repository on GitHub. See Project status for the latest version.
2. Safety notice
Follow your 3D printer’s safety instructions. Do not touch the nozzle or bed while hot. Remove support material carefully with appropriate tools.
3. Required parts and tools
- 3D printer and filament. I use PLA because it is easy to print and suitable for this enclosure.
- Craft knife or a similar tool for removing supports.
The case is expected to include these parts:
| Part | Purpose |
|---|---|
| Chassis | Base holding the display board and I/O board |
| Cover | Top cover |
| Battery holder strap | Holds the battery in place |
| Sleep/wake button and springs | Button extender for pressing the button on the I/O board |
| Potentiometer and encoder knobs | Custom knobs |
| SD card access cover | Covers the chassis opening used to access the SD card slot |
4. Procedure
Only the chassis requires supports. The default slicer settings should work fine.
5. Expected result
A complete set of cleanly printed parts, free of stringing and warping.
6. Inspection or test
Dry-fit the display board, I/O board and battery before final assembly. Check that the screen, jacks, knobs, buttons, microSD slot and USB port line up with their openings.
7. Failure conditions
- Warped parts do not close properly.
- Undersized holes or warped parts can stress the jacks and controls.